Inside the lid you can see traces of carbon deposits

[shapanwwuopi]

Attention! In order for the cover to easily come out of the grooves that hold it on the front body part, you need to lift it up and pull it towards you.

That were formed as a result of high temperatures and splashing of liquid food particles. All this can be easily and without problems washed off. On top you can see the heating elements, located in a secluded place in the case, and on the left is the magnetron, or rather, only its upper part is visible. On the left, in the lower part, you can find the power filter. From it go the network cable and the wires connecting the puzzles.There are also temperature sensors on top that fit tightly to the body.

Temperature sensors react sensitively to temperature fluctuations due to two wires connected that record changes. On the side is a power transformer hidden in a double protection winding and a magnetron philippines telegram data radiator. You should carefully examine the power switch and the time relay, which has a sound signal in the form of a mechanical bell.

The magnetron's serviceability depends on the blower fan, and therefore the speed and quality of heating the food. It is the one that prevents the magnetron radiator from overheating, as it constantly monitors the temperature on its side. The filter board consists of terminals and blue and brown power wires. When you plug the power cord into the network, you can easily measure the voltage in this section of the circuit. If the network voltage is 220 volts, the cord is in good condition. The problem may lie in another angle, namely, in a faulty fuse.

The fuse is located on the power filter and does not allow voltage to pass beyond itself.Its integrity can be measured by the device, but first it is removed from the clamps. This manipulation is performed after the device is completely de-energized. To do this, the plug and sockets are pulled out.